Home · Email authentication by platform · Updated 18 November 2026

MailerLite SPF, DKIM and DMARC setup

Short answer: In MailerLite go to Account settings → Domains → Add sending domain. Add one DKIM CNAME record, one SPF TXT record and one domain verification TXT record exactly as MailerLite shows them, then add a DMARC TXT record at _dmarc yourself. MailerLite says approval can take up to 24 hours.

Ad This page contains one affiliate link (#Ad), to Warmy. CourseSignal is run by Urban Huntsman Ltd, which earns a commission if you sign up through it, at no extra cost to you. This guide is free and based only on the platform’s own help articles. Links to the platform’s docs are plain links.

MailerLite says domain authentication is required if you send from a custom domain, because of Google’s and Yahoo’s sender requirements. New accounts can send their first campaigns without it only during the 14-day trial (MailerLite: Domain authentication). This page lists the records and steps from MailerLite’s own help articles.

Check your domain first, and again when you finish. The free CourseSignal email authentication checker shows the SPF, DKIM, DMARC and MX records your domain publishes today, so you can spot an existing SPF or DMARC record before you add another. MailerLite’s DKIM record name is litesrv._domainkey, so enter litesrv as the DKIM selector. Then run the email blacklist checker on the same domain. Both run free with no sign-up.

Records you will add

MailerLite asks for three records to authenticate the domain. DMARC is a fourth record that MailerLite recommends but does not create for you.

PurposeTypeName / hostValue
DKIMCNAMElitesrv._domainkeylitesrv._domainkey.mlsend.com (as shown in MailerLite’s provider guides; copy the value your account shows)
SPFTXT@ (root domain)Copy from your MailerLite dashboard. MailerLite’s own example contains include:_spf.mlsend.com
Domain verificationTXT@ (root domain)Copy from your MailerLite dashboard
DMARCTXT_dmarcv=DMARC1; p=none; (MailerLite’s basic example)

DKIM name and value from MailerLite’s Namecheap guide. SPF example from How to merge SPF records. DMARC example from The basics of DMARC. Some DNS providers want the short name (litesrv._domainkey), others the full name; follow your provider’s format.

Step by step in MailerLite

  1. In MailerLite, open the Account settings page and select the Domains tab.
  2. Click + Add sending domain, enter the email address you want to send from, and click Save.
  3. If your DNS provider is one of MailerLite’s partners, a popup offers automatic authentication: click Continue, log in to your DNS provider and authorise MailerLite to add the records.
  4. Otherwise choose Authenticate manually. Click Add record under the DKIM CNAME record, select your DNS provider (or Other), and click I’m logged in once you are in your DNS settings.
  5. Add the DKIM CNAME record exactly as shown, then click I added the record. Repeat for the SPF TXT record and the verification TXT record.
  6. Back on the Domains tab, click the … button next to the domain and choose Check DNS records. The status moves from “Authentication in process” to “Authenticated”.
  7. Add your DMARC record at your DNS provider (next section).

DMARC

MailerLite describes DMARC as an additional protocol that many mailbox providers require for bulk senders, and recommends it for all senders, especially those sending around 5,000 or more emails a day (The basics of DMARC).

MailerLite’s basic record is a TXT record with the name _dmarc and the value v=DMARC1; p=none;. To receive reports, add an rua=mailto: tag with an address you check. If your domain already has a DMARC record, keep one record and edit it rather than adding a second.

For a stricter policy (p=quarantine or p=reject), MailerLite recommends consulting a specialist first.

Things MailerLite warns about

After the records verify

  1. Run your domain through the email authentication checker. Enter your DKIM selector if you know it.
  2. Send a test email to an address you control, open the original message and confirm SPF, DKIM and DMARC show “pass”.
  3. Check the domain on the email blacklist checker.
  4. Keep the records in place. Removing them later breaks authentication for mail already in flight and for future sends.

Passing authentication shows your mail is allowed to use your domain. It does not guarantee the inbox: list quality, engagement and complaint rates still matter.

Fix deliverability over time

Authentication is only the first step. Warmy is a paid email warm-up and inbox-placement tool. It gradually sends and receives mail from a connected mailbox to help build sender reputation, and it also offers placement tests. It does not replace SPF, DKIM or DMARC, and it does not guarantee inbox placement.

Warmy’s pricing page lists a 7-day free trial with no credit card required. Its FAQ says the trial is limited to one mailbox and about 15–50 emails a day, which is not long enough to finish warming a new domain. Plans are volume-based. Confirm current plans and trial terms on Warmy’s site before you sign up.

Checked on warmy.io/pricing and warmy.io/faq, 18 November 2026 (GMT). This is a separate deliverability tool. It is not a substitute for authentication, list hygiene, a pre-send placement test, or HighLevel.

FAQ

Does MailerLite require domain authentication?

Yes, if you send from a custom domain. MailerLite’s help centre says it is required because of Google’s and Yahoo’s sender requirements; new accounts can send first campaigns without it only during the 14-day trial.

What is the MailerLite DKIM selector?

MailerLite’s DKIM record name is litesrv._domainkey, so the selector is litesrv.

Does MailerLite create a DMARC record for me?

No. MailerLite gives a basic example (v=DMARC1; p=none; at the name _dmarc) that you add at your DNS provider.

I already have an SPF record for Google Workspace or Microsoft 365. What do I do?

Merge them into one record. MailerLite’s merge guide shows how to combine include mechanisms into a single v=spf1 record with one all mechanism at the end.

Sources (checked 18 Nov 2026)

Every record and step above comes from these official help articles, read on 18 November 2026 (GMT). Platforms change their setup screens, so if your dashboard shows something different, follow the dashboard.

Related: SPF, DKIM and DMARC setup by platform · Email authentication checker · SPF checker · DKIM checker · DMARC checker · Email blacklist checker · Deliverability checklist.