ActiveCampaign SPF, DKIM and DMARC setup
Short answer: In ActiveCampaign go to Settings → Advanced → Sending Domain and choose Configure Domain (automatic) or Set up manually. Manual setup verifies the domain by email, then shows the DKIM, Mailserver Domain (SPF) and DMARC records to add. ActiveCampaign says setting up a sending domain covers everything you need for DKIM, SPF and DMARC.
Ad This page contains one affiliate link (#Ad), to Warmy. CourseSignal is run by Urban Huntsman Ltd, which earns a commission if you sign up through it, at no extra cost to you. This guide is free and based only on the platform’s own help articles. Links to the platform’s docs are plain links.
ActiveCampaign requires a verified domain before you send, and says you will see major deliverability issues if you do not authenticate it. For accounts under 5,000 contacts it is gradually replacing unauthenticated From addresses with a generic shared one (ActiveCampaign: Set up your sending domain).
Check your domain first, and again when you finish. The free CourseSignal email authentication checker shows the SPF, DKIM, DMARC and MX records your domain publishes today, so you can spot an existing SPF or DMARC record before you add another. ActiveCampaign’s most common DKIM record name is acdkim1._domainkey, so try acdkim1 as the selector (use the name your account shows). Then run the email blacklist checker on the same domain. Both run free with no sign-up.
Records you will add
ActiveCampaign shows a table of records after you verify the domain. Each row is a CNAME or TXT record.
| Purpose | Type | Name / host | Value |
|---|---|---|---|
| DKIM | CNAME | e.g. acdkim1._domainkey (ActiveCampaign’s example) | Copy from your ActiveCampaign dashboard |
| Mailserver Domain (SPF) | CNAME | Copy from your ActiveCampaign dashboard | Copy from your ActiveCampaign dashboard |
| DMARC (basic placeholder) | TXT | Copy from your ActiveCampaign dashboard | Copy from your ActiveCampaign dashboard |
ActiveCampaign: the Mailserver Domain CNAME “allows ActiveCampaign to serve the necessary SPF record for you”, so you do not need to create or change an SPF record for ActiveCampaign (ActiveCampaign: SPF, DKIM and DMARC Authentication). Use the short name (acdkim1._domainkey) or the full name depending on whether your DNS provider adds the domain automatically. If there is no default TTL, ActiveCampaign suggests 300.
Step by step in ActiveCampaign
- Click Settings (gear icon), then Advanced.
- In Sending Domain, choose Configure Domain (preferred; connects to supported DNS providers) or Set up manually.
- Manual: enter the domain you send from, without https:// (for [email protected] enter mycompany.com).
- Enter an email address at that domain, click Continue, and click the confirmation link in the email. ActiveCampaign says it expires after seven days.
- Click Set up DNS records, then copy each record’s Type, Name and Value into your DNS provider.
- Back on the Advanced Settings page, open the menu next to the domain and click Recheck Authentication. A green “Authenticated” status means you are ready to send.
- If records do not propagate, the Resolve Issues button runs the Configure Domain flow to finish setup.
DMARC
ActiveCampaign helps you add a basic DMARC record as a bare minimum. It calls this a placeholder that has no impact on your messages but satisfies Gmail’s and Yahoo’s requirement for a basic DMARC record (ActiveCampaign: SPF, DKIM and DMARC Authentication).
ActiveCampaign warns that a quarantine or reject policy needs DKIM set up for your sending domain first, or all your ActiveCampaign mail will fail DMARC.
Things ActiveCampaign warns about
- Domain age. ActiveCampaign recommends an established domain you own, older than 30 days and pointing to a real website, not a blank page.
- Propagation. Typically 5 to 10 minutes, up to 24 hours, and up to 48 hours for a newly bought domain.
- One SPF record. If you do add ActiveCampaign to your SPF, modify the existing record rather than creating a second one.
- MX record. ActiveCampaign says your domain should also have an MX record, usually from Google Workspace or Microsoft 365, so it can receive mail.
After the records verify
- Run your domain through the email authentication checker. Enter your DKIM selector if you know it.
- Send a test email to an address you control, open the original message and confirm SPF, DKIM and DMARC show “pass”.
- Check the domain on the email blacklist checker.
- Keep the records in place. Removing them later breaks authentication for mail already in flight and for future sends.
Passing authentication shows your mail is allowed to use your domain. It does not guarantee the inbox: list quality, engagement and complaint rates still matter.
Fix deliverability over time
Authentication is only the first step. Warmy is a paid email warm-up and inbox-placement tool. It gradually sends and receives mail from a connected mailbox to help build sender reputation, and it also offers placement tests. It does not replace SPF, DKIM or DMARC, and it does not guarantee inbox placement.
Warmy’s pricing page lists a 7-day free trial with no credit card required. Its FAQ says the trial is limited to one mailbox and about 15–50 emails a day, which is not long enough to finish warming a new domain. Plans are volume-based. Confirm current plans and trial terms on Warmy’s site before you sign up.
Checked on warmy.io/pricing and warmy.io/faq, 18 November 2026 (GMT). This is a separate deliverability tool. It is not a substitute for authentication, list hygiene, a pre-send placement test, or HighLevel.
FAQ
Do I need to add an SPF record for ActiveCampaign?
No. ActiveCampaign says the Mailserver Domain CNAME lets it serve the SPF record for you, so you do not need to create or modify an SPF record for ActiveCampaign.
What is the ActiveCampaign DKIM selector?
ActiveCampaign’s most common DKIM record name is acdkim1._domainkey (selector acdkim1). Use the names your account shows.
Does ActiveCampaign set up DMARC?
It helps you add a basic placeholder DMARC record that satisfies Gmail’s and Yahoo’s minimum requirement. A stricter policy is up to you, and needs DKIM working first.
How long does ActiveCampaign authentication take?
Usually 5 to 10 minutes, up to 24 hours, and up to 48 hours for a newly purchased domain. Use Recheck Authentication to check.
Sources (checked 18 Nov 2026)
Every record and step above comes from these official help articles, read on 18 November 2026 (GMT). Platforms change their setup screens, so if your dashboard shows something different, follow the dashboard.
- ActiveCampaign: Set up your sending domain: menu path, Configure Domain vs manual, verification email, record names, TTL, Recheck Authentication, propagation, generic From replacement
- ActiveCampaign: SPF, DKIM and DMARC Authentication: Mailserver Domain covers SPF, basic DMARC placeholder, strict policy needs DKIM, domain age, MX
Related: SPF, DKIM and DMARC setup by platform · Email authentication checker · SPF checker · DKIM checker · DMARC checker · Email blacklist checker · Deliverability checklist.